View HSMS-A100_238977.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HSMx-A10x-xxxxx PLCC-2 Surface Mount LED Indicator
Data Sheet
Features * Industry standard PLCC-2 package * High reliability LED package * High brightness using AlInGaP and InGaN dice technologies Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. * Available in full selection of colors These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. The super wide viewing angle at 120 makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. * Super wide viewing angle at 120 * Available in 8 mm carrier tape on 7 inch reel (2000 pieces) * Compatible with both IR and TTW soldering process Applications * Interior automotive -Instrument panel backlighting -Central console backlighting -Cabin backlighting * Electronic signs and signals -Interior full color sign -Variable message sign * Office automation, home appliances, industrial equipment -Front panel backlighting -Push button backlighting -Display backlighting
CAUTION: HSMN,M,K and E-A10x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details.
Package Dimensions
2.8 0.2 2.2 0.2 0.1 TYP.
1.9 0.2 0.8 0.1
3.2 0.2
3.5 0.2
0.8 0.3
0.5 0.1 CATHODE MARKING (ANODE MARKING FOR AlGaAs DEVICES)
TOP MOUNT
2.8 0.2 2.2 0.2 1.9 0.2
3.2 0.2
5.2 0.2
0.1 TYP.
CATHODE MARKING
0.5 0.1
REVERSE MOUNT
NOTE: ALL DIMENSIONS IN MILLIMETERS.
2
Device Selection Guide Red Part Number HSMS-A100-J00J1 HSMS-A100-L00J1 HSMS-A100-H70J2 HSMS-A100-J80J2 HSMH-A100-L00J1 HSMH-A100-N00J1 HSMH-A100-L70J2 HSMH-A100-M80J2 HSMH-A100-P30J1 HSMC-A100-J00J1 HSMC-A100-Q00J1 HSMC-A100-R00J1 HSMC-A101-S00J1 HSMZ-A100-T00J1 HSMC-A100-P30J1 HSMC-A100-Q40J1 HSMC-A101-R80J1 HSMZ-A100-S80J1 Red Orange Part Number HSMJ-A100-Q00J1 HSMJ-A101-S00J1 HSMV-A100-T00J1 HSMJ-A100-Q30J1 HSMJ-A100-R40J1 HSMJ-A101-R80J1 HSMV-A100-S80J1 Orange Part Number HSMD-A100-J00J1 HSMD-A100-L00J1 HSMD-A100-J7PJ2 HSMD-A100-K4PJ2 HSML-A100-Q00J1 HSML-A101-S00J1 HSML-A100-Q7PJ1 HSML-A100-R7PJ1 HSML-A101-R8WJ1 3 Min. Iv (mcd) 4.0 10.0 5.0 6.3 63.0 160.0 80.0 125.0 125.0 Typ. Iv (mcd) 15.0 15.0 100.0 220.0 Max. Iv (mcd) 12.5 20.0 200.0 315.0 395.0 Test Current (mA) 20 20 10 10 20 20 20 20 20 Dice Technology GaP GaP GaP GaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP Min. Iv (mcd) 63.0 160.0 250.0 63.0 100.0 125.0 200.0 Typ. Iv (mcd) 100.0 200.0 350.0 Max. Iv (mcd) 155.0 315.0 395.0 620.0 Test Current (mA) 20 20 20 20 20 20 20 Dice Technology AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP Min. Iv (mcd) 4.0 10.0 3.0 5.0 10.0 25.0 12.5 20.0 40.0 4.0 63.0 100.0 160.0 250.0 40.0 63.0 125.0 200.0 Typ. Iv (mcd) 15.0 15.0 15.0 50.0 100.0 100.0 140.0 220.0 350.0 Max. Iv (mcd) 8.0 15.5 32.0 62.0 100.0 100.0 200.0 395.0 620.0 Test Current (mA) 20 20 10 10 20 20 10 10 20 20 20 20 20 20 20 20 20 20 Dice Technology GaP GaP GaP GaP AlGaAs AlGaAs AlGaAs AlGaAs AlGaAs AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP
Device Selection Guide, continued Yellow/Amber Part Number HSMY-A100-J00J1 HSMY-A100-L00J1 HSMY-A100-J35J2 HSMY-A100-K45J2 HSMA-A100-Q00J1 HSMA-A101-S00J1 HSMU-A100-S00J1 HSMA-A100-Q35J1 HSMA-A100-R45J1 HSMA-A101-R8WJ1 HSMU-A100-S4WJ1 Min. Iv (mcd) 4.0 10.0 4.0 6.3 63.0 160.0 160.0 63.0 100.0 125.0 160.0 Typ. Iv (mcd) 12.0 12.0 100.0 220.0 320.0 Max. Iv (mcd) 10.0 20.0 155.0 315.0 395.0 500.0 Test Current (mA) 20 20 10 10 20 20 20 20 20 20 20 Dice Technology GaP GaP GaP GaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP AlInGaP
Yellow Green Part Number HSMG-A100-J02J1 HSMG-A100-K72J2 HSME-A100-M02J1 HSME-A100-N82J1 Min. Iv (mcd) 4.0 8.0 16.0 30.0 Typ. Iv (mcd) 18.0 70.0 Max. Iv (mcd) 20.0 100.0 Test Current (mA) 20 10 20 20 Dice Technology GaP GaP AlInGaP AlInGaP
Emerald Green Part Number HSMG-A100-H01J1 HSMG-A100-G31J2 HSMG-A100-H41J2 HSME-A100-L01J1 HSME-A100-M3PJ1 Min. Iv (mcd) 2.5 1.6 2.5 10.0 16.0 Typ. Iv (mcd) 8.0 40.0 Max. Iv (mcd) 4.0 8.0 40.0 Test Current (mA) 20 10 10 20 20 Dice Technology GaP GaP GaP AlInGaP AlInGaP
Green Part Number HSMM-A101-R00J1 HSMM-A100-S00J1 HSMM-A101-Q7PJ1 HSMM-A101-R7PJ1 HSMM-A101-R8PJ1 HSMM-A100-S8PJ1 Min. Iv (mcd) 100.0 160.0 80.0 125.0 125.0 200.0 Typ. Iv (mcd) 200.0 350.0 Max. Iv (mcd) 200.0 315.0 395.0 620.0 Test Current (mA) 20 20 20 20 20 20 Dice Technology InGaN InGaN InGaN InGaN InGaN InGaN
4
Device Selection Guide, continued Cyan Part Number HSMK-A101-R00J1 HSMK-A100-S00J1 HSMK-A100-S8WJ1 HSMK-A101-Q3WJ1 HSMK-A101-R4WJ1 Min. Iv (mcd) 100.0 160.0 200.0 63.0 100.0 Typ. Iv (mcd) 170.0 280.0 Max. Iv (mcd) 620.0 155.0 315.0 Test Current (mA) 20 20 20 20 20 Dice Technology InGaN InGaN InGaN InGaN InGaN
Blue Part Number HSMB-A100-J00J1 HSMB-A100-J70J2 HSMB-A100-K80J2 HSMN-A101-N00J1 HSMN-A100-P00J1 HSMN-A101-N7YJ1 HSMN-A101-N8YJ1 HSMN-A100-P8YJ1 Min. Iv (mcd) 4.0 5.0 8.0 25.0 40.0 30.0 30.0 50.0 Typ. Iv (mcd) 15.0 50.0 70.0 Max. Iv (mcd) 12.5 25.0 80.0 100.0 155.0 Test Current (mA) 20 10 10 20 20 20 20 20 Dice Technology GaN GaN GaN InGaN InGaN InGaN InGaN InGaN
Note: 1. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
5
Part Numbering System HSM x 1 - A x2 x 3 x 4 - x 5x 6 x 7 x 8x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color
Absolute Maximum Ratings (TA = 25C) Parameters HSMS/D/Y/G DC Forward Current[1] 30 mA [2] Peak Forward Current 100 mA Power Dissipation 63 mW Reverse Voltage Junction Temperature Operating Temperature Storage Temperature
HSMH 30 mA 100 mA 60 mW
HSMC/J/L/A HSME 30 mA[3,4] 20 mA[3,4] 100 mA 100 mA 63 mW 48 mW 5V 110C -55C to +100C -55C to +100C
HSMZ/V/U 30 mA[3,4] 100 mA 72 mW
HSMM/K/B/N 30 mA 100 mA 114 mW
Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, Frequency = 1 kHz. 3. Drive current between 10 mA and 30 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended.
6
Optical Characteristics (TA = 25C) Peak Wavelength PEAK (nm) Typ. 635 645 635 639 621 623 600 609 583 592 594 565 575 558 566 523 502 428 468 Dominant Wavelength[1] D (nm) Typ. 626 637 626 630 615 617 602 605 585 590 592 569 570 560 560 525 505 462 470 Viewing Angle 2 1/2[2] (Degrees) Typ. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Luminous Efficacy v[3] (lm/W) Typ. 120 63 150 155 240 263 380 320 520 480 500 590 560 650 610 500 300 65 75 Luminous Intensity/ Total Flux Iv(mcd)/v(mlm) Typ. 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45
Part Number HSMS-A100 HSMH-A100 HSMC-A10x HSMZ-A100 Red Orange HSMJ-A10x HSMV-A100 Orange HSMD-A100 HSML-A10x Amber HSMY-A100 HSMA-A10x HSMU-A100 Yellow Green HSMG-A100 HSME-A100 Emerald Green HSMG-A100 HSME-A100 Green HSMM-A10x Cyan HSMK-A10x Blue HSMB-A100 HSMN-A10x
Color Red
Dice Technology GaP AlGaAs AlInGaP AlInGaP AlInGaP AlInGaP GaP AlInGaP GaP AlInGaP AlInGaP GaP AlInGaP GaP AlInGaP InGaN InGaN GaN InGaN
Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, I e in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt.
Electrical Characteristics (TA = 25C) Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.2 2.6 1.9 2.6 1.9 2.4 2.2 2.6 3.9 4.3 3.4 4.05 Reverse Voltage VR @ 100 A Min. 5 5 5 5 -- -- Reverse Voltage VR @ 10 A Min. -- -- -- -- 5 5 Thermal Resistance RJP (C/W) 180 180 280 280 280 280
Part Number HSMS/D/Y/G HSMH HSMC/J/L/A/E HSMZ/V/U HSMB HSMM/K/N
7
1.0 0.9
RELATIVE INTENSITY
BLUE CYAN GREEN
EMERALD GREEN YELLOW GREEN AMBER
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 RED ORANGE RED ORANGE
WAVELENGTH - nm
1.0
35
FORWARD CURRENT - mA
GaP EMERALD GREEN GaP YELLOW GREEN GaN BLUE GaP YELLOW
30 25 20
RELATIVE INTENSITY
0.8
HSMS/D/Y/G HSMZ/V/U
0.6
GaP ORANGE
HSMH
0.4 GaP RED 0.2
15 10 5 0
HSMC/J/L/A/E HSMM/K/N HSMB
0
380
430
480
530
580
630
680
730
780
0
1
2
3
4
5
WAVELENGTH - nm
FORWARD VOLTAGE - V
Figure 1. Relative intensity vs. wavelength.
Figure 2. Forward current vs. forward voltage.
1.8
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
35
Gap AlInGaP AlGaAs
540
DOMINANT WAVELENGTH - nm
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20
30
CURRENT - mA
InGaN GaN
530 520 510 500 490 480 470 460 0 5 10 15 20 BLUE 25 30 35 CYAN GREEN
25 20
HSMS/D/G/ Y/U/V/Z HSMC/J/L/A/E HSMM/K/B/N
HSMH
15 10 5
25
30
35
0
0
20
40
60
80
100
120
DC FORWARD CURRENT - mA
TEMPERATURE - C
CURRENT - mA
Figure 3. Relative intensity vs. forward current.
Figure 4. Maximum forward current vs. ambient temperature. Derated based on T JMAX = 110C, R JA = 500C/W.
Figure 5. Dominant wavelength vs. forward current - InGaN devices.
8
0.5
1.0
DELTA VF (NORMALIZED AT 25C)
0.4
NORMALIZED INTENSITY
0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -100 InGaN/GaN -50 0 50 100 150 GaP/AlGaAs/ AlInGaP
0.8
0.6
0.4
0.2
0 -90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
TEMPERATURE - C
ANGULAR DISPLACEMENT - DEGREES
Figure 6. Forward voltage shift vs. temperature.
Figure 7. Radiation Pattern.
10 to 20 SEC. 217 C TEMPERATURE 255 C +5 C -0 C 6 C/SEC. MAX.
20 SEC. MAX.
TEMPERATURE
240C MAX. 3C/SEC. MAX. 100-150C 3C/SEC. MAX. 120 SEC. MAX. 60-150 SEC.
3 C/SEC. MAX. 125 C 25 C
183C -6C/SEC. MAX.
MAX. 120 SEC.
60 to 150 SEC.
TIME
TIME
* THE TIME FROM 25 C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 8a. Recommended SnPb reflow soldering profile.
Figure 8b. Recommended Pb-free reflow soldering profile.
4.50 1.50
TURBULENT WAVE
250
TEMPERATURE - C
LAMINAR WAVE HOT AIR KNIFE
2.60
200 150
FLUXING
100 50 30 0 10
BOTTOM SIDE OF PC BOARD PREHEAT TOP SIDE OF PC BOARD
20
30
40
50
60
70
80
90
TIME - SECONDS
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150C (100C PCB) SOLDER WAVE TEMPERATURE = 245C AIR KNIFE AIR TEMPERATURE = 390C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE.
Figure 9. Recommended wave soldering profile.
9
;; ;;; ;; ;; ;;
100
SOLDER RESIST
Figure 10. Recommended soldering pad pattern.
TRAILER 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL.
COMPONENT
LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL.
C
A
USER FEED DIRECTION
Figure 11. Tape leader and trailer dimensions.
4 0.1
4 0.1
2 0.05
2.29 0.1
1.75 0.1 +0.1 1.5 -0 3.5 0.05 +0.3 8 -0.1 3.81 0.1 A
C
3.05 0.1
+0.1 1 -0
8 0.229 0.01
Figure 12. Tape dimensions.
10
2 +0.5 -0
O 20.5 0.3
180
62.5
+0 -2.5
O 13 0.2 8.4
+1.50 (MEASURED AT OUTER EDGE) -0.00
14.4 (MAX. MEASURED AT HUB)
LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm)
7.9 (MIN.) 10.9 (MAX.)
Figure 13. Reel dimensions.
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 14. Reeling orientation.
Baking is required under the following conditions: a) the humidity indicator turns pink b) the pack has been opened for more than four weeks. Baking recommended condition: 60 5C for 20 hours. This product is qualified as Moisture Sensitive JEDEC Level 2A.
11
Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only. X5 X6 0 3 4 5 7 8 9 Min Iv Bin
Color Bin Select (X 7) Individual reel will contain parts from one full bin only. X7 0 Z Y W V U T S Q P N M L K 1 2 3 4 5 6 Full Distribution A and B only B and C only C and D only D and E only E and F only F and G only G and H only A, B, and C only B, C, and D only C, D, and E only D, E, and F only E, F, and G only F, G, and H only A, B, C, and D only E, F, G, and H only B, C, D, and E only C, D, E, and F only A, B, C, D, and E only B, C, D, E, and F only
Color Bin Limits Emerald Green A B C D Min. (nm) 552.5 555.5 558.5 561.5 Max. (nm) 555.5 558.5 561.5 564.5
Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52
Yellow Green E F G H
Min. (nm) 564.5 567.5 570.5 573.5
Max. (nm) 567.5 570.5 573.5 576.5
Intensity Bin Limits Bin ID G1 G2 H1 H2 J1 J2 K1 K2 L1 L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 12 Min. (mcd) 1.80 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 Max. (mcd) 2.24 2.80 3.55 4.50 5.60 7.20 9.00 11.20 14.00 18.00 22.40 28.50 35.50 45.00 56.00 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 1125.00
Amber A B C D E F
Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5
Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0
Color Bin Limits Blue A B C D Min. (nm) 460.0 465.0 470.0 475.0 Max. (nm) 465.0 470.0 475.0 480.0
Orange A B C D E
Min. (nm) 597.0 600.0 603.0 606.0 609.0
Max. (nm) 600.0 603.0 606.0 609.0 612.0
Cyan A B C D
Min. (nm) 490.0 495.0 500.0 505.0
Max. (nm) 495.0 500.0 505.0 510.0
Red Orange Min. (nm) A 611.0 B 616.0
Max. (nm) 616.0 620.0
Red Min. (nm) Full Distribution
Max. (nm)
Tolerance of each bin limit = 1 nm.
Green A B C D
Min. (nm) 515.0 520.0 525.0 530.0
Max. (nm) 520.0 525.0 530.0 535.0
Tolerance of each bin limit = 12%.
Packaging Option (X8X9) Option J1 J4 H1 H4 J2 J5 H2 H5 Test Current 20 mA 20 mA 20 mA 20 mA 10 mA 10 mA 10 mA 10 mA Package Type Top Mount Top Mount Reverse Mount Reverse Mount Top Mount Top Mount Reverse Mount Reverse Mount Reel Size 7 inch 13 inch 7 inch 13 inch 7 inch 13 inch 7 inch 13 inch
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004-2005 Agilent Technologies, Inc. Obsoletes 5989-1207EN May 15, 2005 5989-3100EN

▲Up To Search▲

Price & Availability of HSMS-A100

	To Download HSMS-A100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .